Cartridge Filtration Systems

Sediment (TSS) Reduction!

High turbidity in water can cause several problems in water applications, like pump wear, RO membrane plugging, reduced disinfection etc, besides being unpleasing in appearance. Neotec’s range of cartridge filtration systems are designed to efficiently reduce turbidity down to sub-micronic levels without compromising on system flow rates.

  • 100% stainless steel for durability.
  • All 316 stainless steel construction.
  • Convenient band clamp lid closure is standard for easy cartridge replacement.
  • Pipe fittings are readily accessible for easy installation.
  • Adjustable top plate accepts variable length cartridges for more options.
  • Two drains provided for clean and dirty fluids.
  • Legs and mounting tabs are available.
  • Knife edge seals provided at both ends of all DOE cartridges for superior performance.
  • Rated for temperatures to 250° F. (No plastic holding rods.)
  • Pressure rating to 150 psi.
  • Housings for pressures to 300 psi are available.
  • Optional sanitary connections.
  • Models to accept DOE, 222 and cartridges with 226 end caps.
  • Protective poly-coat over stainless steel standard finish.
  • Electro-polishing is available.

Specifications

Material:

Multi-cartridge and Jumbo filter housings are constructed using 316L stainless steel.

Pressure Rating:

Housings are rated for pressures to 150 pso (10 bar). 300 psi pressure rating is available.

Temperature:

Filters are rated for temperatures to 250ºF (121ºC).

Gaskets & Seals:

Buna-N is standard. Viton, EDPM and Teflon are available.

Finish:

Protective poly-coat over stainless is standard finish. Electro-polishing available.

Pressure Drop:

Initial pressure drop is <1 psi at designed flow rates for housings only.

Cartridge Types:

Housings are designed to accept DOE cartridges. Adapters for 222 & 226 cartridges available.


Single Cartridge, Filter Housings in 316 Stainless Steel

The ideal filter housings for convenience and savings, in all 316 stainless steel. Single cartridge is easy to install, easy to remove and they are washable and reusable, five micron and up! Housings come with band clamp lid closure, mounting legs, pressure gauges installed on inlet and outlet fittings and compression cap for superior sealing. Housings rated for pressures to 150 psi. Cartridges are rated for temperatures to 140°F.